The aesthetic appeal and organic quality of hardwood timber have been some of the top choices ever since. With proper maintenance of timber flooring, your property's value will increase in no time.
Timber flooring installation companies in Melbourne hold expertise in this field and have a proven record of providing high-quality sand and flooring to all their clients.
They have successfully reached customers' expectations and satisfied their requirements with flying colours. This blog will further take you through the process of floor sanding and polishing.
- Cleaning the Floors
The process of sanding and polishing timber floors begins with professionals sweeping and vacuuming the timber floors. Before the sanding process starts, it’s essential to make the surface clean so that the process gets fine results. Assuring tidy floors before sanding prevents any sand hazards and further damage. In addition to that, seal the air vents and doorways to prevent the sand from accumulating, sanding or invading other rooms. - Nail Removal
After the thorough cleaning of the floor, the professionals will look for any nails that might be poking out on the floor. Once they discover those nails, they will either remove them or hammer them down to provide a smooth surface, without damaging the floor sanding machine. - Removing Old Stain/Polish
Before you finally begin to sand the floor, it is crucial to remove any existing old stain or polish from the floor, ignoring this step would jam the grit sanding paper which will further increase the timing of the sanding process. Depending on the floor type, the professionals would use suitable techniques to remove these existing marks and finishing, which would ultimately yield the best results. - Floor Sanding
Before sanding begins, collecting all the timber flooring supplies in Melbourne is important to make the process hassle-free.
Floor sanding refers to the removal of the top layer of the timber to disclose the underneath healthy wood. In addition to this sanding, it is also beneficial in removing unevenness that is present along the edges of the floorboard.
Once you get rid of the previous finishing, your floor is ready to be sanded. The professionals also check for floorboard damages like peaking, crowning or cupping during the initial stages of sanding for spot treatment or also replace the floorboards if necessary. - Floor Vacuuming
Upon completion of the initial process of sanding, floor specialists opt to clean the floor further by vacuuming, and preparing the floor for the application of further finishing. - Application of Sealer
Finally, after vigorous cleaning and vacuuming process, the floor is now ready for the application of a sealant or any other desired finishing.
Depending on the look you are trying to achieve from your flooring, the professionals may apply a variety of finishes such as varnish, modified or natural oils, and oil-based or water-based polyurethanes.
Once the first coating is dried properly, then the floor specialist would buff the flooring with the use of a specialised buffing machine.
This will further prepare the floor for applying the next layer of finish. Generally, three layers of floor finishing are applied in the form of bluffing and polishing between each coating of the floor, which further yields the desired effect and look.
This is the process of sanding and polishing that makes the timber flooring installation better and sturdier.
Social Profile