To add that extra shine to your timber floors you may consider refurnishing your timber flooring. There are many factors like old stains, flooring type; species of timber flooring that decide the lasting of your timber flooring. For easy maintenance you can consider installing engineered wood otherwise timber flooring requires maintenance over time to function at its best. Floor sanding and polishing services in Melbourne can rejuvenate your tired floor in a few steps.
Then again it depends upon the condition of your flooring; the better its condition the lesser time it will take to refurnish your flooring at a reasonable cost. Damaged floors usually take more time to refurnish and may cost you a considerable amount of money to get the job done. This blog will detail about several conditions that affect the sanding process of the floor.
1. Level of Damage in the Timber Flooring
Timber flooring gets affected by peaking, buckling, crowning and cupping these results in uneven timber floors. Thus the unevenness is treated by the process of sanding which further helps in flattening the surface.
However sanding won’t suffice for severe damages, instead required damage control is done before the sanding process.
In the end, it is the decision of the homeowner, the owner may choose to skip the flattening process and start directly with sanding.
In that case, it may require more time to finish the task as the professionals would make use of a hand sander to carry out the process of sanding.
The cause of damage to the floors is rooted in the presence of moisture. Hence to check on moisture level you can take certain precautions like fixing water leakage on time and applying sealants at the scheduled hour.
When the damage is caused by cupping, buckling, crowing or wear and tear then the floor would require extra sealing than usual which might further disturb the overall sanding process.
The damage occurs more to outside structures like decks and pergolas. So, it’s better to book an appointment for deck sanding in Melbourne so that you are protecting the surface from various damages like wear and tear, scratches, etc.
2. Harsh Stains
It is necessary to remove all sorts of harsh or oily stains before the sanding process begins. This is because they take a considerable amount of time to get removed and may clog the sanding paper. Hence to avoid this situation the sanding professionals take the necessary steps to remove the old and harsh stains that might hinder the overall process of sanding.
3. Type of Flooring
The process of sanding varies depending on the floor type.Parquetry flooring is one such flooring that requires a different kind of sanding process as compared to engineered or hardwood flooring. Not all parquetry flooring requires a similar technique of sanding.
The sanding professionals will inspect your parquetry flooring closely, and depending upon their inspection they will choose the desirable technique that will be ideal for that particular parquetry flooring. The timber floor sanding services in Melbourne hold the expertise and required qualifications that can bring the best out of your parquetry flooring.
4. Kind of Floor Species
Another factor that rules out the sanding is the kind of floor species used for the flooring purpose. The species of the floor would ultimately decide the kind of sanding required for that particular floor.
Additionally, the species also decide the expenditure and time require for commencing the process of sanding fruitfully.
Timber floor species like walnut, wine or even oak don't involve many complications in the sanding process and can be done in less time.
On the contrary species like Mahagony and jarrah involves many complications comparatively and require a considerable amount of time for the sanding process to be done.
5. Kind of Floor Layout
The cost and time of the sanding process depend on the area of the flooring. The more big the area the more you need to invest both time and money in the sanding process. It is advisable to have a proper discussion with the sanding professionals regarding the cost and time required to complete the process. This will lessen the chance of getting stuck between unforeseen situations.
Wrapping Up
Lastly, choosing the right flooring expertise is important to ensure that your investment is worth it. The floor sanding and polishing services in Melbourne offer hassle-free services and yield desirable results. They are ideal for rejuvenating damaged floors by closely inspecting them and completing the work responsibly within the given time.
Social Profile