A glass pool fence is an ingenious method to ensure that your family is not exposed to danger and it does not block the sight of your back yard. Australian homeowners now prefer clear fencing as this does not block the view of the pool and the surrounding gardens. It will be useful whether you are a DIY hobbyist or are outsourcing the services of a professional because you know the steps and have the appropriate tools. This manual is on the glass pool fence hardware which provides the entire system to be complete and a brief review of the Glass Pool Fence Spigots which complete the fence.
- Plan, Measure, and Prepare
- Check Your Local Regulations
Find out the pool fence regulations in your council before you purchase any kind of hardware. Australian Standard AS 1427.3.1 provides the height of the fence and proximity of the posts to the pool. A certificate that the posts were installed in a proper manner is also required by most of the councils.
- Choose Quality Hardware
In selecting glass pool fence hardware, one should order stainless-steel components that cannot get wet and come in contact with the pool chemicals as they will not rust. The hardware kit will consist of:
- Post brackets: to fix posts to the ground or footing.
- Gliding rails: to track the glass panels.
- Glass clips: to fix the panels.
- Cable tie, locking devices: to ensure that the rail system is solid.
- Glass pool fence spigots: to give a finished end of the fence. - Install the Posts
- Dig Post Holes
Create a hole with a depth of not less than 400mm with a width of not less than 300mm. In case you take concrete posts and combine a 1:3 concrete to gravel mix, pour into the hole, and insert the post. Allow it to cure in a period of 24 hours and proceed.
- Set Posts with Brackets
Install the Glass Pool Fence Hardware posts. Masonry screws or concrete anchors will be used to secure the brackets to the ground or footing. Ensure that every post is standing upright to the last degree a level is your friend. - Mount the Gliding Rails
- Attach Rails to Posts
Items Attaching the hardware kit You are attaching rails that glide onto the posts. The rails should be a little below the top of the post, and the panels of glass should be lying on the rails. The rails may break in case all bolts are tightened and over-tightened.
- Check Alignment
Test the level of rails by drawing a straight line on top of them. When one of the rails is not in contact, bend the brackets until the rails are level. This holds the glass panels in place so that they do not lean or appear distorted. - Secure the Glass Panels
- Slide Panels into Rails
Slide the glass panels into the rails one by one and gently. Make the panels flat so they should not wobble. Rubber mallet can be used when necessary -tap the corners to get the panels to lie down.
- Use Glass Clips
Install the panel glass clips at every corner. These clips are inserted into rail system and fix the panel. Clips should be adjusted so that there is no stress on the glass.
Conclusion
Glass pool fence is a good option of fence due to safety and aesthetics. With proper planning, selection of appropriate Glass Pool Fence Hardware and attention to details, you will be able to view your pool clearly and unobstructed while keeping everyone safe. After installation, regular maintenance is important—learn how to Clean Glass Pool Fencing to keep it clear, spotless and looking its best. Keep in mind, it is important to consider the local regulations, use proper components, and check your work before starting to use your swimming pool. Happy fencing!
Social Profile